KYRON

An inner fender liner can be applied against the underside of an exposed fender for protecting the fender from damage by rocks or other objects which may be thrown up against it. The fender liner comprises a relatively thick, but flexible, sheet of plastic material shaped to cover the rear portion of the fender. The liner is bent to conform to the underside of the fender and fit flush thereagainst. At least one peripheral attachment flange, formed by a scored section of the liner, may be used to help hold the liner in place using some of the fasteners normally used to hold the fender on the vehicle.

A tire or tyre is a ring-shaped covering that fits around a wheel rim to protect it and enable better vehicle performance by providing a flexible cushion that absorbs shock while keeping the wheel in close contact with the ground.

An inner fender liner can be applied against the underside of an exposed fender for protecting the fender from damage by rocks or other objects which may be thrown up against it. The fender liner comprises a relatively thick, but flexible, sheet of plastic material shaped to cover the rear portion of the fender. The liner is bent to conform to the underside of the fender and fit flush thereagainst. At least one peripheral attachment flange, formed by a scored section of the liner, may be used to help hold the liner in place using some of the fasteners normally used to hold the fender on the vehicle.

Radiators are used for cooling internal combustion engines, chiefly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plant or any similar use of such an engine. They operate by passing a liquid coolant through the engine block, where it is heated, then through the radiator itself where it loses this heat to the atmosphere. This coolant is usually water-based, but may also be oil. It's usual for the coolant flow to be pumped, also for a fan to blow air through the radiator.

Tail light or tail lamp is a lighting system that is part of the vehicle usually mounted at the rear of the vehicle and usually come in pairs (left end and right end of the vehicle). This group of lights on one mounting is consisting of different lights with different function. From signal lights, park lights, brake lights, and reverse lights, the whole tail light assembly is very important in every car. With each function to perform the tail light is standard to every vehicle on the road. Without it, drivers cannot detect whether there are presence of other vehicles around him.